Configure Port Forwarding on Peplink (Pepwave) Modem

Typically all devices connected to a router are protected by the router’s firewall. To allow access through the Peplink (Pepwave) router to a specific Ethernet device on the Peplink's LAN, it is necessary to manually forward the required ports.

NOTE: In the below example, the LAN has been changed from default to 192.168.51.0/24.

To begin, login to the device and visit the Advanced > Port Forwarding page.

Click the "Add Service" button to create a port forwarding rule.

1. Create a name for the rule in the "Service Name" field.
2. Specify the protocol and port details for the traffic that is being forwarded in the "IP Protocol" and "Port" fields.
3. Select the WAN interface to apply the rule to and place a checkbox next to the target WAN IP in the "Inbound IP Address(es)" field.
4. Specify the IP address of the LAN device to forward the traffic to in the "Server IP Address" field.
5. Click the Save button at the bottom of the page to save the port forwarding rule.
6. At the top right of the page, click the "Apply Changes" button. 

When finished creating all necessary port forwarding rules, reboot the Peplink modem.

Links of Interest

• Peplink Products